BT2 user manual - H-5911-9004-02-B Page | 80
o Range labels: labels the ranges from the hole collar.
o Axes labels: labels the XYZ axes centred on the hole collar.
o Station Text Size: enter a value to determine the size of the hole name label.
• Hole Linework: Sets elements of the appearance of a hole collar in the 3D View.
o Default decoration: select the default appearance of a hole collar in the 3D View. Either a square
or a circular grid centred on the hole.
o Range Lines: displays range rings centred on the hole collar.
o Show Axes: displays axes centred on the hole collar.
o Max radius: sets the maximum radius to which the range lines expand during a deployment.
11.3.8 Imports
The Imports tab lists all file formats which can be imported into Carlson Boretrak. Tap on any import to define
default options for each format.
These settings can also be altered during each individual import.
11.3.9 Exports
The Exports tab lists all file formats which can be exported from Carlson Boretrak. Tap on any export to define
default options for each format.
These settings can also be altered during each individual export.