144
COIL #1, COIL #2
The unloader solenoid output is a triac output. The triac is
rated for 115/208-230 VAC with a maximum continuous
rating of 30 VA. The smart controller energizes the unloader
solenoid coil in an on/off sequence per the 0 to 10 VDC ana-
log input signal received by the smart controller.
LIQUID INJECTION
The liquid injection solenoid output is a triac output. The
triac is rated for 115/208-230 VAC with a maximum contin-
uous rating of 30 VA. The smart controller will energize the
liquid injection solenoid as required to provide compressor
motor cooling and maintain compressor discharge below
230 F.
To Next Page
Loading...
