12 EN
06. FIRST START
1. Remove any protective films, stickers and any
other packing material from the appliance. Make
sure that the accessories of the appliance fit the
parts list, and that the appliance is not damaged.
2. Choose a safe, firm and stable surface with
a power supply socket within easy reach and
make sure there is some free space around the
appliance: at least 150 mm on the sides and at
least 350 mm above the appliance.
3. Install the external drip tray (1). Make sure it is
installed properly.
4. Fill the water tank (9) with water (see “Filling
the water tank”).
5. Fill the coffee bean container (7) with coffee
beans (see “Filling the coffee bean container”).
6. Unwind and straighten the power cord (13)
and insert the plug into the socket located on
the back of the appliance. Insert the other end
of the power cord into a wall socket with suitable
power voltage. Clean the appliance by pressing
the hot water button . The appliance is ready
to use.
To Next Page
Loading...
