EN 23
None of the appliance’s components should be washed
in a dishwasher. Do not immerse the appliance in water.
Do not use metal objects to remove scale or coffee
deposits: you may scratch metal or plastic surfaces.
CLEANING THE BODY AND CONTROL PANEL
1. Disconnect the appliance from the mains supply outlet.
2. Empty internal and external drip trays.
3. Use a damped cloth or non-scratching cleaner to clean the
water stains on the appliance and panel.
AUTO CLEANING OF THE BREWER
The function is used to clean the brewing unit and water channel.
1. Place a cup under the coffee spout. Press Cleaning button .
2. Water will clean the brewing unit and dispense from spout.
3. A cup of water will be dispensed. It will stop automatically, or
you can press to stop.
CAUTION!
Remove the milk tube connector from the milk frother
inlet.
MANUAL CLEANING OF THE BREWER
1. Slightly press the bottom of the service door to open it.
Remove the service door.
2. Press the release knob. Remove the brewer and rinse it under
tap water. Use the brush (12).
3. Use a cloth to clean insides of the appliance thoroughly. Dry it
completely before closing the cover.
4. Insert the brewer back to its original position and install the
service door back.
To Next Page
Loading...