Fig. 22 — PF755TL Control Pod Assembly
LEGEND
1 — DP1 Port 1 connection on the control-pod-mounted Human Interface
Module (HIM). The connection is on the back of the assembly that
includes the control-pod-mounted HIM and HIM cradle. This assembly is
shown not installed. When this assembly is installed, the DPI Port 1
connection on the HIM connects to the Control Pod at Item 2.
2 — DPI Port 1 connection on the control pod. The connector this is shown ere is
part of the DPI Port 1 connection on the HIM and HIM cradle assembly
(Item 1)
3 — Communication option module (shown installed at Port 5).
4 — Expansion I/O module (shown installed at Port 4).
5 — Embedded Ethernet/IP
a
connectors.
a. Third-party trademarks and logos are property of their respective owners.
6 — Terminal block TB1 behind Port 0 (the Ethernet/IP) on the main control
board.
7 — DPI Port 2 for handheld HIM connection, remote HIM connection, or a
splitter cable (Item 10)
8 — Splitter cable connection that provides the following:
• When the DPI Port 1 connection on the control pod (Item 2) is
unused, this splitter cable connection provides a DPI Port 1
connection.
• When the DPI Port 1 connection on the control pod (Item 2) is used,
this splitter cable connection provides a Port 3 connection.
9 — Splitter cable connection that provides a handheld HIM connection, or a
remote HIIM connection to DPI Port 2
10 — Splitter cable that connects to DPI Port 2 (Item 7) and provides the
connections that are listed in Items 8 and 9
To Next Page
Loading...
