Carrier 30WG - Alarms Menu; Reset Alarms; Current Alarms; Alarm History

24
Broadcast Menu – BROCASTS
No. Point name Status Default Displayed text* Description
1 Ccnbroad 0 to 2 2 Activate Not applicable
OAT Broadcast
2 oatbusnm 0 to 239 0 Bus Bus number of the unit with the outdoor temperature
sensor
3 oatlocad 0 to 239 0 Element Element number of the unit with outdoor temperature
4 dayl_sel disable/enable disable Daylight Savings Select Summer/winter time activation (Daylight saving selection)
Daylight Savings Select – Summer time (entering)
5 Startmon 1 to 12 3 Month Month
6 Startdow 1 to 7 7 Day of Week (1=Monday) Day of the week (1 = Monday)
7 Startwom 1 to 5 5 Week Number of Month Week of the month
Daylight Savings Select – Winter time (leaving)
8 Stopmon 1 to 12 10 Month Month
9 Stopdow 1 to 7 7 Day of Week (1=Monday) Day of the week (1 = Monday)
10 Stopwom 1 to 5 5 Week Number of Month Week of the month
*Depends on the selected language (English by default).
Date/Time Menu – DATETIME
No. Point name Status Unit Displayed text* Description
Date (DD/MM/YY)
1 d_of_m 1 to 31 - Day of month Day of the month
2 month 1 to 12 - Month of year Month
3 year 20nn - Year Year
4 dow Monday-Sunday - Day of Week Day of the week
Time (HH:MM)
5 hour 0 to 24 hour Hour Hour
6 minute 0 to 59 min Minute Minutes
Daylight Saving Time
7 dlig_on no/yes - Daylight sav. time on Daylight saving time active
8 dlig_o no/yes - Daylight sav. time o Daylight saving time inactive
9 tom_hol no/yes - Tomorrow is a holiday The following day is a holiday
10 tod_hol no/yes - Today is a holiday The present day is a holiday
*Depends on the selected language (English by default).
Control Identication Menu – CTRL_ID
No. Status Default Displayed text* Description
1 "xx chars" 30WG / 30WGA / 61WG Device Description Device description
2 "xx chars" Location Description Location description: The number corresponds to the country
3 "xx chars" ECG-SR-20M4Bxxx Software Part Number Software version
4 "xx chars" MAC address Serial Number Serial number (MAC address)
*Depends on the selected language (English by default).
7.3 - Alarms menu
Icon Displayed text* Description Associated table
Reset Alarms Alarm reset ALARMRST
Current Alarms Current alarms CUR_ALRM
Alarm History Alarm History ALMHIST1
*Depends on the selected language (English by default).