Carrier 40GVM-009 User Manual

22
REMOTE CONTROL AND FUNCTIONS
1. Remote Control Display
2. ON/OFF Button
3. MODE Button
4. Setpoint Clock, Timer Up (+) and Down (---) Buttons
5. Fan Speed
6. Horizontal Louver Swing Button
7. Clock Button
8. Timer ON Button
9. Dry Coil Button
10. Temperature Button
11. Timer OFF Button
12. Turbo Mode Button
13. Sleep Mode button
14. Light Button to Turn ON or OFF Display on Front Panel
1
23
4
5
6
7
8
9
10
11
12
13
14
A12434
Remote Control 09k -- 18k
______________________________________________________________________________________________________________
Remote Control Display
1
3
2
11
6
7
9
151413128
5
4
10
AUTO
COOL
DRY
FAN
HEAT
MODE DISPLAY
NOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevant symbols are displayed.
A12435
1. TRANSMISSION INDICATOR: Illuminates when remote con-
trol transmits signals to the indoor unit.
2. OPER INDICATOR: This symbol appears when the unit is
turned on by the remote control, and disappears when the unit is
turned off.
3. FAN SPEED DISPLAY: Indicates the set fan speed. AUTO is
displayed when unit is running in AUTO mode.
4. MODE DISPLAY: Indicates the current operation mode
“AUTO”, “COOL”, “DRY”, “FAN ONLY”, or “HEAT”
5. SLEEP DISPLAY: Indicates unit is running in SLEEP mode.
6. TEMPERATURE DISPLAY: Temperature setting from 61_F
(16_C) to 86_F(30_C) will be displayed. If FAN mode is selec-
ted, there will be no temperature displayed.
7. CLOCK DISPLAY: Indicates the current time (0 to 24 hours).
8. CLOCK INDICATOR: Displayed with time and is not displayed
when setting ON/OFF timer.
9. TIMER ON / TIMER OFF DISPLAY: ON is displayed if
TIMER ON is set. OFF is displayed if TIMER OFF is set. ON OFF
displayed if both ON and OFF timers are set.
10. TURBO DISPLAY: Indicates unit is running in Turbo Mode.
11. DRY COIL DI SPLAY: Indicates unit is running in DRY COIL
mode where the fan continues to run after the unit is shut off to
dry the coil.
12. TEMPERATURE DISPLAY: Indicates if room temperature or
set point temperature is being displayed on the front panel.
13. SWING DISPLAY: Sets louver position or set louvers to continu-
ously move for better air distribution.
14. LIGH T DISPLAY: Indicates if LED display on the front panel
is illuminated.
15. LOCK DISPLAY: Indicates if remote control is locked.

Carrier 40GVM-009 Specifications

General

Brand	Carrier
Model	40GVM-009
Category	Air Conditioner
Language	English