Carrier 42C Series - Page 33

33
Fig. 27 — 42DA Hi-Performance Hideaway, Rear Return, With Optional Electric Heat
7/8 [22] O.D.
Condensate
Drain
Optional 5/8 [16] O.D.
Tell-Tale Drain Connection
(Available on standard and
extended drain pans.)
Optional
Extended
Drain Pan
(See Note d)
Optional
Extended
Drain Pan
(See Note 8)
C
A'
Electric Strip
Heater Element
11-1/2
[293]
27-5/8
[701]
1 [25]
3/4
[18]
13-3/8
[341]
16-3/8
[417]
Supply
Air
1 [25] Supply
Duct Collar
D
Top View
Front View
Right Side View
7-3/8
[188]
9-1/4
[236]
26-3/4
[679]
7/8
[21]
9 [230]
1-7/8
[47]
3 [78]
4-1/2
[114]
4-1/2
[114]
B
A
Resilient Mount Grommet
with 3/8 [10] Dia. Hole
Qty 4
Control Box
(See Notes e,h)
Optional
Service
Switch
Mounting Holes
Chilled/Hot
Water Supply
and Return
Connections
Optional Drip Lip
Mounting Location
No Valve Pkg
Shipped loose
(See Note d)
13
[330]
E
UNIT
SIZE
42DA
DIMENSIONS in. [mm]
a,b,c,d,e,f,g,h
NOTE(S):
a. Right-hand units shown, left-hand opposite.
b. All dimensions are ± .25 [6]. Drawing not to scale.
c. Product specifications are subject to change without notice.
d. Drip lip recommended. Provided when valve package is ordered.
e. Control box size and position may vary. Consult factory.
f. Position may vary.
g. Service access is located on the front of the control box.
h. Knockouts on the bottom and side of the control box for incoming connections.
QUANTITY/UNIT
A A' B C D E Blower Motor
06 23 [584] 32 [813] 14 [356]
13-1/2 [343] 17 [432] 18-3/4 [476] 11
08 28 [711] 37 [940] 19 [483]
13-1/2 [343] 22 [559] 23-3/4 [603] 11
10 32 [813] 42 [1067] 23 [584]
14-1/2 [368] 26 [660] 27-3/4 [705] 11
12 37 [940] 47 [1194] 28 [711]
14-1/2 [368] 31 [787] 32-3/4 [832] 22
14 42 [1067] 52 [1321] 33 [838]
14-1/2 [368] 36 [914] 37-3/4 [959] 22
16 47 [1194] 56 [1422] 38 [965]
13-1/2 [343] 41 [1041] 42-3/4 [1086] 22
18 52 [1321] 62 [1575] 43 [1092]
14-1/2 [368] 46 [1168] 47-3/4 [1213] 22
20 56 [1422] 66 [1676] 47 [1194]
14-1/2 [368] 50 [1270] 51-3/4 [1314] 22