Carrier A Series User Manual

PG80VTLA: Installation, Start-up, Operating and Service and Maintenance Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
2
A190045
*135 size furnaces require a 5 or 6-in. (127 or 152 mm) vent. Use a vent adapter
between furnace and vent stack. See Installation Instructions for complete
installation requirements.
Fig. 1 – Dimensional Drawing
FURNACE SIZE
A B C D
VENT
CONNECTION
SIZE
SHIP WT.
LB (KG)
ACCESSORY
FILTER
MEDIA
CABINET
SIZE
CABINET
WIDTH
OUTLET
WIDTH
TOP AND
BOTTOM FLUE
COLLAR
BOTTOM
INLET WIDTH
36045A 14-3/16 (360) 12-9/16 (319) 9-5/16 (237) 12-11/16 (322) 4 (102) 111 (50) 16 (406)
36070A 14-3/16 (360) 12-9/16 (319) 9-5/16 (237) 12-11/16 (322) 4 (102) 118 (54) 16 (406)
48070B 17-1/2 (445) 15-7/8 (403) 11-9/16 (294) 16 (406) 4 (102) 132 (60) 16 (406)
48090B 17-1/2 (445) 15-7/8 (403) 11-9/16 (294) 16 (406) 4 (102) 131 (59) 16 (406)
60090C 21 (533) 19-3/8 (492) 13-5/16 (338) 19-1/2 (495) 4 (102) 142 (64) 20 (506)
66110C 21 (533) 19-3/8 (492) 13-5/16 (338) 19-1/2 (495) 4 (102) 154 (70) 20 (506)
66135D 24-1/2 (622) 22-7/8 (581 15-1/16 (383) 23 (584) 4 (102)* 168 (76) 24 (610)
U.S. ECCN: Not Subject to Regulation (N.S.R.)
SD5523-4 REV. B
NOTE: ALL DIMENSIONS IN INCH (MM)

Carrier A Series Specifications

General

Display	LCD
Fan Speed Control	Auto, Low, Medium, High
Error Code Display	Yes
Operating Modes	Cool, Heat, Auto, Fan
Output Voltage	24V AC
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity Range	0% to 90% non-condensing