Carrier CDII-184R1-0CTR4 - Page 31

31
Characteristics
(1) Compatible with all HFC refrigerants (R134a, R404A, R407C, R410A)
(2) No Hydrolysis unlike POE (Polyester) Lubricants.
(3) Better solubility with process fluids.
(4) Superior resistance to Capillary Tube Blockage.
(5) Unsurpassed Lubricity for greater wear protection.
(6) Optimum for Non-dryer System.
Typical Specifications
Items
FV5OS
Viscosity @ 40 °C
mm²/s
50.69
Viscosity @100°C
mm²/s
6.790
Viscosity Index
84
Density
g/cm³
0.9315
Color (ASTM)
L0.5
Flash Point
206
Pour Porn
°C
—37.5
Total Acid Number
mgKOH/g
0.01 >
Volumetric Resistivity (RT)
Ω . cm
5 X 10"
Copper Corrosion
100
°
C X 1 hr
1(1B)
Water Contents
ppm
150 >
Table - 1
Storage and Handling
Keep container closed when not in use. Keep away from heat, flame, or strong oxidants.
Health and Safety
Reference should always be made to the Material Safety Data Sheet. Always apply barrier
creams to the skin and prolonged contact. Use special hand cleansers and wash thoroughly
with soap and water. Do not get in eyes. Avoid breathing vapor, mists or fume.
7.11 CLAMPING
Clamping is necessary to prevent vibrations from being transmitted. When passing the pipes
through walls, opening should be sealed to minimize vibration transmission. Some slack in
pipes between structure & unit should be left.