32
8. Electrical System
8.1 Field wiring & Electrical connections
WARNING
• Do the field wiring as per field wiring diagram. Color coding is indicative only.
• Earthing / Grounding is must. Check Ground to neutral voltage, it must be less than 2V.
• Never bypass any electrical protections provided in the unit. Never vary/alter factory
wiring connections
• Do not use Aluminum wire as main power supply cable.
• Failure to observe these safety instructions could result in serious personal
injuries/electrical shock/fire & death.
• Keep power wires separate from signal/communication cables while installation.
• Use shielded cables for communication/signaling.
8.2 QUICK CHECK TABLE
To Next Page
Loading...
