QUICK START
Setting the temperatures for heating and cooling
Your thermostat is installed with pre-set heating and cooling temperature settings.
You can use these or change them so your home is as warm or as cool as you'd like
it to be. These steps will hold the temperature where you set it. For the temperature
to change automatically according to your lifestyle needs - whether you're home.
away or asleep - you'll need to follow the Touch 'N' Go instructions on pages 13 -
19.
1. Open the door. o •
2. Press the up or down button located on the right side of o o
the display. You will see the preset temperature settings
for heating and cooling. The word hoar will flash, o o o o
3. Press the up or down button to change the hoar setting.
Stop on the correct setting, oil ito
4. Press the hold/run button. ®_o
o o
000 0
To Next Page
Loading...
