QUICK START
Changing the temperature
There are times when you want to change the temperature,
Here's how,
1. Open the door. °[_le
2. Press the up or down buttons on the right side until you o_e
reach the desired temperature setting. This creates a "tern- o o
porary hold" until the next pre-set time period. You will ooo o
see temporary bold on the display. (To switch from the
cooling temperature to the heating temperature - or vice
versa - press the mode button on the left until the word
heat or cool is flashing.) "ll IlO
3. To maintain that temperature setting so it doesn't change °_°
during the next pre-set time period, press the hold/run o o
button on the left side. The display will show bold. The ° °° o
temperature will stay at the setting you selected until you
release the hold.
4. To return the temperature to the pre-set level for that time °[_Io
period, press hold/run. This releases the hold and the tern- ®_°
perature will return to its programmed level, o o
5. Close the door. o o o o
To Next Page
Loading...
