PROGRAMMING THE THERMOSTAT
Assigning time periods to temperatures
To get the most from your thermostat's programming features, you will want to take
the remaining steps that will link your four schedule time periods (P1, P2, P3 and
P4) to the heating and cooling temperatures you set with the Touch 'N' Go buttons
- home, away and sleep.
Taking these final steps will be easier if you complete the grid below before
programming the thermostat. It will help you decide how you want to assign the
comfort temperatures you've selected for home, away and sleep to the time periods
you've established. The completed grid will help you keep track of your
information as you work with the thermostat.
Here's an example of how this would look using the factory-set periods and Touch
'N' Go options.
6:00 AM 1
8:00 AM 2
5:00 PM 3
10:00 PM 4
Home
Away
Home
Sleep
To Next Page
Loading...
Need help?
General
