PROGRAMMING THE THERMOSTAT
3. Select one of these three options by pressing the up or
down button located to the right of the display. You may o_e
also make your selection by pressing the days button o •
again. Select all days if your weekday schedule is the o o
same as your weekend schedule, o o o o
4. When you have selected one of the three options (all days, o_o
weekdays, weekends), press the period button at the o_o
bottom of the thermostat. Pl will flash on the display, o o
5. Press the Touch 'N' Go button - home, away or sleep - oeo o
you want to use during period 1 (P1) from the row of but-
tons just below the display. You will see the triangle icon
(_r) above the button selected. This tells the thermostat
whether you are home, away, or asleep during P1. The
thermostat will use the heating and cooling temperature O_o
settings you've selected for that Touch 'N' Go button. For o_o
example, if your heating temperature setting for home is o o
72 degrees, the thermostat will keep the heat at 72 during
P1. ooo o
6. Press the period button twice. P2 will flash on the display.
To Next Page
Loading...
