Carrier XCT7 40VCW117FQEE - Installer Settings and Features; ECO Parameter Configuration; Child Lock Activation

Adjust ECO Parameters: (ICON)
• Cooling: Power on the unit. Adjust set temperature to 30°C. Press and hold FAN and TEMP+ for 5 seconds. The
minimum allowable set temperature will be displayed in the top right corner. Use TEMP+/- to change the parame-
ter, then press FAN save. The default minimum temperature is 23°C.
• Heating: Power on the unit. Adjust set temperature 16°C. Press and hold FAN and TEMP- for 5 seconds. The
maximum allowable set temperature will be displayed in the top right corner. Press TEMP+/- to change the param-
eter, then press FAN to save. The default maximum temperature is 26°C.
• Dry (Dehumidication) ECO parameters are the same as Cooling.
Child Lock: (ICON)
• Press and hold TEMP+ and TEMP- for 5 seconds to activate/deactivate the Child Lock function. When the Child
Lock function is active,
will appear.
Installer Setting
8