ZS Sensors
Carrier Sensors CARRIER CORPORATION ©2021
Installation Guide All rights reserved
4
ZSP-CAR
ZSP-C-CAR
ZSP-H-CAR
ZSP-V-CAR
ZSP-HC-CAR
ZSP-HV-CAR
ZSP-BNK
ZSP-C-BNK
ZSP-H-BNK
ZSP-V-BNK
ZSP-HC-BNK
ZSP-HV-BNK
• LCD display
• button to override the schedule and
put the zone in an occupied state, or
force the zone to an unoccupied state
• and buttons to change any
editable property, such as the setpoint
temperature
• button to cycle through information
defined in the control program
• Green LED to indicate occupied state
• Local access port
ZSPF-CAR
ZSPF-C-CAR
ZSPF-H-CAR
ZSPF-V-CAR
ZSPF-HC-CAR
ZSPF-HV-CAR
ZSPF-BNK
ZSPF-C-BNK
ZSPF-H-BNK
ZSPF-V-BNK
ZSPF-HC-BNK
ZSPF-HV-BNK
All of the ZS Pro's features plus:
• button to turn on heating, cooling,
or fan only, or set to auto control.
• button to adjust fan speed
• F/C button to set temperatures to
Fahrenheit or Celsius
To configure the control program for the desired user interaction with the sensor, see the ZS Sensor Application
Guide.
For basic user instructions, see the ZS Sensor User Guide.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
