CAS LP-II Service Manual (English)

Other manuals for CAS LP-II

Service Manual89 pages

Network Manual27 pages

Questions and Answers:

N
Natalie HartmanAug 14, 2025
Why my CAS Scale will not power ON?
- K
  Kerri RojasAug 14, 2025
  If your CAS Scale won't power on, here's what you can check: * Ensure the power cord is plugged into a working outlet. Also, check and replace the fuse and power cord if necessary. * Inspect or replace the main power switch and the Power Supply Input Harness (CN1 PS). * If there's no power to the Main PCB, check/replace the Wire Harnesses (CN21 PS, CN22 PS), the Power Supply, Display Harness (J17/J18 M-PCB), Display Stalk, ADC Wire Harness (CON3 AD-PCB), AD-PCB, Network PCB or the Printer Assembly. * If the power to the Main PCB is OK, check/replace all EPROMs, the Memory Expansion PCB, or the Main PCB. Also, refer to the 'No power to Main PCB' solutions.
K
Karen RussellAug 21, 2025
How to fix a CAS Scale that powers on and goes to zero but the weight is inaccurate?
- T
  Timothy JacksonAug 21, 2025
  If your CAS Scale powers on and goes to zero, but the weight is inaccurate, check for any obstructions on the platter or platform. Remove all items and cycle the power. Reprogram the weight settings and perform a span calibration. You may also need to check the 'Load Cell Not Ready' solutions.
N
nguyenallisonAug 25, 2025
Why is the printed data faded on my CAS LP-II Scales?
- J
  Joshua HortonAug 25, 2025
  If the printed data from your CAS Scale's printer is faded, try these solutions: Check/replace the Media (Labels or paper), clean the Thermal Print Head, lower the Printer Speed, adjust the Print Head, check/replace the Rubber Roller (Platent), Wire Harness (J19 M-PCB), or Thermal Print Head.
T
Tina AllenAug 28, 2025
How to fix a CAS LP-II Scales printer that is missing a column of print?
- M
  Michael BeckAug 28, 2025
  If your CAS Scale's printer is missing an entire column of print, try cleaning the Thermal Print Head. If that doesn't work, check/replace the Wire Harness (J19 M-PCB), Thermal Print Head, or Media (Labels or paper).
G
gutierrezmichaelAug 31, 2025
Why does my CAS LP-II Scales printer print blank labels?
- A
  Andrew MartinAug 31, 2025
  If your CAS Scale's printer prints blank labels, make sure the Print Head is in the lock-down position and that thermal labels or paper are properly installed. Check/replace the Media (Labels or paper), Wire Harness (J19 M-PCB), TPH Wire Harness (J13 M-PCB), Power Supply, Thermal Print Head, or Printer Assembly.
J
Jessica BruceSep 3, 2025
What causes an A/D Converter Error on CAS LP-II Scales?
- L
  Laura JacobsSep 4, 2025
  If you are encountering an A/D Converter Error on your CAS Scale, check the connection between the load cell and the A/D converter. If the connection is good, try replacing the load cell or the A/D converter.
D
David YuSep 7, 2025
How to resolve a Calibration Warning on CAS LP-II?
- G
  Gloria FlowersSep 7, 2025
  To resolve a Calibration Warning on your CAS Scale, recalibrate the scale.
P
pearsontylerSep 10, 2025
How to fix NV Fragmentation Error on CAS Scales?
- M
  melanie32Sep 10, 2025
  To resolve the NV Fragmentation Error on your CAS Scale, perform NV defragmentation in the Calibration menu.