2 Unpacking and Assembly
9
2 Unpacking and Assembly
2.1 Box Contents
Pictured above are the contents that come with the LP-2. The scale comes with one roll of LST-8010
labels already installed and ready to use. It also comes with the software which can be used to
program the scale using the RS-232C cable, which is also included. It is important to note that the RS-
232 cable is a Y cable, with 3 connections. The 25 pin connector is no longer used, but is included for
possible future use. The scale also comes with a tear bar (not pictured) which is used for continuous
strip labels. A CAT-5 or Ethernet crossover cable, which can also be used to connect to a PC can be
purchased from your authorized CAS dealer.
To Next Page
Loading...
