EasyManua.ls Logo

CAS LP-II - Gravity Constant Settings

CAS LP-II
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Programming
32
6 Programming
6.1 Main Menu
The following highlighted selections from the Main Menu make up the Program Menu.
You will require a level 2 password (or higher) to access any of the highlighted functions. If the scale is
new or there are no level 3 passwords programmed, then you can enter 001 and press ENTER or PRINT at
the password screen; otherwise, enter your password here. Remember that if there are ANY level 3
passwords, then 001 will NOT work. When the screen is at the Main Menu Press 8 and the screen will
read:
The LP-2 can have up to 99 clerks/users. Each clerk is given a 5 character alphanumeric password.
Each password can have any of 4 access levels: 0, 1, 2, or 3. Level 3 access has access to ALL scale
functions; where as levels 0 and 1 have minimal access. Each password is also associated with a
department number (0 to 32), where 0 grants access to all departments and 1 to 32 grants access to
that specific department only. Levels 0 and 1 can only be associated with a department number 1 to
32. Level 3 is only associated with a department access 0. Level 2 can be either.
This allows for user to be assigned to level 1 or 0; managers assigned to level 2 with a specific
department; store managers could be level 2 and department access 0; and owner’s or MIS can be
level 3.
Remember that the only password that you cannot assign to a clerk is 001. This is because it is the
Master Password. You will never see it listed in the List All Users list.
NOTE: The format for entering a password at a password entry screen is as follows: you enter XXYYYYY
where XX is a compulsory 2 digit Operator ID number and YYYYY is your password. If you are Operator
number 5 and have password ALEX22 then you must enter “05ALEX22” at a password entry screen.
Passwords are always in CAPS. The scale will automatically correct for lowercase.
< MAIN MENU >
1.REG: Sale Mode 6.Z: Report & Clear
2.MGR: Manager Mode 7.SET: Settings
3.RPK: Repack Mode 8.Store Settings
4.PLU: Program PLUs 9.Global Settings
5.X: Report 0.Network Management
INS/CAPS
< ENTER LEVEL 2 PASSWORD >
[*******]

Table of Contents

Other manuals for CAS LP-II

Related product manuals