CAS PD-II - 2.4. Capacity Display and Option Setting (C - 4)

11
2.3. Capacity Display and Option Setting(C – 4)
For pariculars please inquire at CAS .
Key operation :
◆ Press the ZERO key to enter setting value.
◆ Press the TARE key to change digit position.
◆ Press the lb/kg (* )key to have number Up.
2.3.1. UNIT, TARE Setting(C–4–1)
B7 B6 B5 B4
B3 B2
B1 B0
Display
Unit
Calibration
Unit
NTEP
TARE Relase
TARE
0:kg
1:lb
0: Others
0:TARE
1:TARE,
ZERO
0:Successive Tare
1:One time Tare
Don’t care
0:kg
1:lb
1: NTEP Don’t care Don’t care
2.3.2. Capacity Setting(C–4–2)
2.3.3.
B7 B6 B5 B4 B3 B2 B1 B0
CAPACITY INTERVAL
Kg lb
00011 6 15
00111 15 30
01001 30 60
01100 60 150
00 : Single
01 : Dual
2.3.4. Comma Setting (C–4–3)
B7 B6 B5 B4 B3 B2 B1 B0
Comma
Dislplay
1: Possible
0: Impossible