29
(3.3) INTERFACE WITH ECR (SHARP)
⒜ PIN ASSIGNMENT
PIN NO. DOCUMENT
1 DATA1 (Output from PD-II to ECR)
2 DATA2 (Output from PD-II to ECR)
3 DATA3 (Output from PD-II to ECR)
4 DATA4 (Output from PD-II to ECR)
11 CLOCK (Input from ECR to PD-II)
13 MOTION (Output from PD-II to ECR)
19 ENABLE (Input form ECR to PD-II)
21 OUT OF RANGE (Output from PD-II to ECR)
22 GND
23 GND
24 GND
⒝ PIN CONNECTION
ECR ( SHARP ) PD-II
16 PIN D-SUB CONNECTOR 25 PIN D-SUB CONNECTOR
1 --------------------------- 1
3 --------------------------- 2
4 --------------------------- 3
5 --------------------------- 4
7 --------------------------- 11
15 --------------------------- 13
8 --------------------------- 19
9 --------------------------- 21
10 --------------------------- 22
11 --------------------------- 23
12 --------------------------- 24
To Next Page
Loading...
