11
8. Accumulative display
Step Operation
1
When the
key is clicked, it will return to the weight setting by
clicking any key after Weight, Unit weight, Quantity and Total accumulated amount、 XXXXX 、
cumulated score are continuously displayed in the display window.
9. Accumulative clear
Step Operation
1
If the key is clicked in an Accumulative function, then it means
deletion of accumulated Accumulative values. After
XXXXXX、 Clr AC 、XXXXXX is
continuously displayed in the display window, it will return to the weight
setting a second later.
10. Print
Step Operation
1
Upon outputting using RS232, printing will be executed by RE232
method by clicking the key.
11. Set up Hi limit
Step Operation
1
a. When the
key is clicked for a long time, it will enter into setting of
an upper limit value when the power supply is turned on. In the display
window,
original value、 SEtHi 、 0 will be continuously displayed.
b. When ~ keys are clicked, original value、 SEtHi 、 0 will be
continuously displayed in the display window.
c. After inputting values, click the
key, it will return to the weight
setting.
To Next Page
Loading...
Need help?
General
