`
12
12. Set up Low limit
Step Operation
1
a. When the key is clicked for a long time, it will enter into setting of
an upper limit value when the power supply is turned on, In the display
window, original value、 SEtLo 、 0 will be continuously displayed.
b. When ~ keys are clicked, original value、 SEtHi 、 0 will be
continuously displayed in the screen.
c. After inputting values, click the key, it will return to the weight
setting.
13. Check function
Step Operation
1
While clicking the
, either “CK ON”or “CK OFF”Will be displayed in
the UNIT WEIGHT screen.
To Next Page
Loading...
Need help?
General
