CAS RW Series - Key Functions Overview; Entering Test Mode; Entering Set Mode

Road Weigher
▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩
- 10 -
■ KEY
* How to enter TEST mode
Turn on the Power while pressing the
key and TEST mode starts
* How to enter SET mode
Turn on the Power while pressing the
key and SET mode starts
ZERO key : Used to return the display to the center of ZERO when the
platform is empty
kg/lb key : Display kg/lb by turn (U.S.A version)
PRINTER key : Print the current total weight
(the weight is added to the total weight of a vehicle)
TOTAL PRINT key: Display the total weight of a vehicle for a second
Print the total weight of a vehicle(summing each axle)
LOCAL/TOTAL key : Display local weight / current total weight in turn
LIGHT key : ON or OFF light in turn
ON/OFF key : Power on or off