Startup sequence
User Guide
User Guide
2-15
Note: The device has completed its autonomous hardware tests and loaded all
software. It will start the process of connecting to Verizon's network and coming into
service. See Chapter 3, Web GUI for information on how to log into the Network
Extender Admin Web page.
3.
Acquired IPv4 address (“Acquired an IP address”).
The Network Extender State
: The device is running its software and has started to
connect to the Verizon network.
The unit is configured by default to acquire a local IPv4 address from the local DHCP
server.
Admin Website State
: The Admin Website is accessible from the LMT and WAN
ports.
4. Conducting DNS lookups (“Identifying the Initial Network”).
The Network Extender State
: The device has acquired a local IPv4/IPv6 address from
local DHCP. The next step is to conduct DNS lookups for the public FQDNs
provisioned at the factory.
Admin Website State
: The Admin Website is accessible.
Note: The Network Extender needs to resolve the FQDNs for A-GPS, and initial
SeGW from the public DNS server.
5.
GPS acquisition in progress (“Waiting for GPS position fix”).
The Network Extender State
: The device is awaiting a GPS fix before progressing.
Admin Website State
: The Admin Website is accessible.
Note: Until a GPS fix is provided, the device will not be able to continue and receive
configuration information.
6.
Attempting to reach the Initial SeGW (“Attempting to reach Initial network”).
The Network Extender State:
The device has conducted DNS lookups for the public
FQDNs provisioned at the factory and is trying to contact the initial SeGW.
Admin Website State
: The Admin Website is accessible.
To Next Page
Loading...