Alarm troubleshooting
User Guide
User Guide
5-15
20073 Connection failure
for all NTP servers
The device cannot communicate with any
of the configured NTP servers.
Please check the LAN/
Firewall settings,
connectivity status and
available bandwidth. The
device will operate correctly
if GPS signal is valid.
20074 GPS Antenna not
connected on boot
There is an issue with the GPS connector/
Antenna.
Ensure open view of the sky.
Reboot/power cycle the unit.
If the issue persists, replace
the GPS Antenna.
Table 5-2. Alarm troubleshooting (continued)
Unique
Alarm ID
(Code)
Alarm Description Recommendation
To Next Page
Loading...