105
E550 - E550 CR - E550 PM - E550 PM CR Automatic Single-Side Edgebander Rel. 1.1.1
Problems, possible causes and remedies
PROBLEMS POSSIBLE CAUSES REMEDIES
The edge has a damaged
surface
Excessive scraping
Used and/or clogged blade
Adjust the glue scraper cor-
rectly Change blade or rotate
it in its recess
Glue is not scraped away Unit is excluded
Unit not correctly adjusted
Use the exclusion knobs
NOTES
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
To Next Page
