13
E550 - E550 CR - E550 PM - E550 PM CR Automatic Single-Side Edgebander Rel. 1.1.1
E550 PM CR
1.3 STANDARD FEATURES
• Operating logic controlled by PLC
• Thermostatic glue control with automatic standby
• Display with various messages for using the machine
• Chain-feed for panels with rubber pads
• Top bar with double row of rubber rollers adjustable in height, with numerical indicator
• Pre-milling with diamond cutterheads
• Feed guide with adjustment to a tenth of a millimetre
• Advance edging coil / strip
• Forward movement of edge in coils/strips controlled by operation of the cutting shear
• Pneumatic shear for coil cutting
• Teon-coated glue pot, capacity 1 kg approx.
• 2 pressure rollers with 1st oating roller in aluminium
• End trimming unit for front and rear ends with single high-frequency motor (straight cuts) with copiers
• No. 2 trimming motors with combined cutter heads for bevelled /multibeam curved edges
• 2 trimming motors with combined cutterheads for bevelled/rounded edges
• Corner rounding unit diamond cutterhead
• Extensible front support with small rollers for large panels
• Coil support cross Ø 800 mm with rollers
• Openable rear closure
• Dust extraction outlet connection Ø 120 mm + 2 outlets Ø 80 for pre-milling
• CE conformity
• Standard voltage 400 V / triple-phase / 50 Hz – optional 220 V / triple-phase / 50 Hz available on request
1.4 TECHNICAL DATA (STANDARD VERSION)
• Panel height: min. 8 – max. 50 mm
• Edge thickness: 0.4–3 mm (coiled tape); 0.4–5 mm (strips)
• Feed speed panels at 9 m/min
• Panel width: min. 95 mm
• Panel length: min. 110 mm
• Pre-milling motors: 200 Hz – 12,000 rpm – 0.75 kW (each)
• Cutter head with diamond insert D=60 Z=2+2
• Glue pot heating element: 1490 W – 6 cartridges
• End trimming motor: 200 Hz – 12,000 rpm – 0.22 kW
• Trimming motors: 200 Hz – 12,000 rpm – 0.37 kW (each)
• Corner rounder motor 12,000 rpm – 0.22 kW
• Cutter heads with multibeam curved knives: WIDIA combined for curved/bevelled edges
Ø 75 mm Z4 – hole Ø 16 mm (r = 2 mm)
• Total installed power: 6 kW approx.
• Weight 626 kg approx.
OPTIONAL ACCESSORIES:
• Edge scraping unit
• Glue scraping
• Brushes
• Infrared lamp
• Cleaning spray agent unit
• Cleaning spray unit
• Trimmer nesting kit
• LED lighting
• Edge scraping extraction
• Interchangeable glue pot PUR / EVA
• Cooling / anti-static spray unit
To Next Page
