37
E550 - E550 CR - E550 PM - E550 PM CR Automatic Single-Side Edgebander Rel. 1.1.1
CAP 3 USO DELLA MACChINA E550 PM CR
OVERALL VIEW
Fig. 3.0.4
1 Feed guide adjustment
2 Cleaning spray agent unit
3 Pre-milling unit
4 Edge cutting unit with feed movement
5 Glue pot
6 Pressure roller unit
7 Automatic end trimming unit with circular blades
8 Flush trimming unit
9 Corner rounding unit
10 Edge scraper unit
11 Edge scraping extraction
12 Glue scraping unit
13 Cleaning spray unit
14 Bufng unit
15 Ratiomotor for panel feed (chain)
16 Electrical panel
17 Compressed air system cover
18 Interchangeable glue pot PUR/EVA
A Feed guide
B Pressure bar height adjustment
C Control panel
D Extensible support
E Edge coil support cross
To Next Page
