5. Use (A) and (D) to move the pointer to
[WATCH SETTINGS].
6. Press (C).
This displays the watch setting screen.
7. Use (A) and (D) to move the pointer to
[SMART ALARM].
8. Press (C).
9. Use (A) and (D) to select the smart alarm
and snooze function ON/OFF setting you
want.
[OFF]
Disables smart alarm,
disables snooze
[ON]
Enables smart alarm, disables
snooze
[ON (SNZ)]
Enables smart alarm, enables
snooze
●
The snooze function on/off setting you
configure is for the smart alarm only.
●
The currently selected setting will be
indicated by a check mark ( ) to the
left.
10. Press (C).
11. Use (A) and (D) to set the alarm time hour.
12. Press (C).
This causes the cursor to move to the
minute setting of the time.
13. Use (A) and (D) to set the alarm time
minute.
14. Press (C).
This moves the cursor to the smart period
setting.
●
A smart alarm sounds when the watch
determines you are lightly asleep during
the smart period.
15. Use (A) and (D) to specify a smart period
setting.
[15]
From 15 minutes before alarm
time, to alarm time
[30]
From 30 minutes before alarm
time, to alarm time
[45]
From 45 minutes before alarm
time, to alarm time
[60]
From 60 minutes before alarm
time, to alarm time
●
The currently selected setting will be
indicated by a check mark ( ) to the
left.
Note
●
The shorter the smart time period, the
higher the probability that the alarm will
sound at the alarm time.
16. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the watch setting screen re-
appears.
●
You can view the setting time of the
smart alarm and whether the smart
alarm setting and snooze setting are on
or off.
17. Hold down (E) for at least one second to
return to the current time screen.
Note
●
If you do not perform any operation for
two or three minutes while the smart
alarm setting screen is displayed, the
watch automatically returns to the
current time screen.
Watch Operation Guide 3515
35
To Next Page
Loading...
Need help?
General
