Casio 3515 User Manual

Measuring a Split Time
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [STOPWATCH].
3. Press (C).
This displays the stopwatch screen.
4. Use the operations below to measure
elapsed time.
C
E
C
Stop
Split
Start
Hour, minute, second
5. Press (E) to reset the stopwatch to all
zeros.
Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
●
The watch does not perform a vibration alert
while the battery level indicator shows
. The watch does not perform a beep
alert while the battery level indicator is
“CHG” or lower.
●
You can enable the beep and vibration
alerts as required.
l
Configuring Sound and Vibration
Settings
Setting a Start Time
The start time can be set in 1-second units up
to 60 minutes.
●
To configure timer settings with the
CASIO WATCHES phone app
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
l
Configuring Watch Settings
●
To configure timer settings with the
watch
EZ Settings
Use this procedure to change the timer start
time setting in 30-second increments.
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [TIMER].
3. Press (C).
This displays the TIMER screen.
4. Press (A) or (D).
This returns to the EZ setting screen.
5. Use (A) and (D) to change the timer start
time setting.
●
Each press of (A) changes the setting
by -30 seconds, while (D) changes it by
+30 seconds.
6. Press (C).
This starts the timer operation.
Watch Operation Guide 3515
61

Casio 3515 Specifications

General

Brand	Casio
Model	3515
Category	Watch
Language	English