Specifying the Calorie
Display Unit
You can use the procedure below to select
either calories (kcal) or joules (kJ) as the
calories burned unit.
Important!
●
When Tokyo (TOKYO) is the Home
City, the calories burned unit is fixed as
kilocalories (kcal) and cannot be
changed.
1. Display the current time screen.
l
Watch Mode
2. Hold down (A) for at least two seconds.
This enters the Control Mode.
3. Use (A) and (D) to select [SETTING].
4. Press (C).
This displays the setting menu screen.
5. Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6. Press (C).
This displays the GENERAL SETTINGS
screen.
7. Use (A) and (D) to move the pointer to
[UNITS].
8. Press (C).
9. Use (A) and (D) to move the pointer to
[ENERGY].
10. Press (C).
11. Use (A) and (D) to select the calorie unit
you want.
[kcal] Kilocalories
[kJ] Kilojoules
12. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the unit setting screen re-
appears.
13. Hold down (E) for at least one second to
return to the current time screen.
Note
●
If you do not perform any operation for
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
●
You can also use the CASIO
WATCHES phone app to change the
calories burned unit.
Specifying the Barometric
Pressure Unit
You can specify either hectopascals (hPa) or
inches of mercury (inHg) as the display unit for
barometric pressure values.
Important!
●
When Tokyo (TOKYO) is the Home
City, the barometric pressure unit is
fixed as hectopascals (hPa) and
cannot be changed.
1. Display the current time screen.
l
Watch Mode
2. Hold down (A) for at least two seconds.
This enters the Control Mode.
3. Use (A) and (D) to select [SETTING].
4. Press (C).
This displays the setting menu screen.
5. Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6. Press (C).
This displays the GENERAL SETTINGS
screen.
Watch Operation Guide 3515
84
To Next Page
Loading...
Need help?
General
