Casio 3515 User Manual

●
The message [NO DATA] will appear if
there are no new messages.
●
While notification receive is enabled,
reception of a notification causes its
contents to appear on the display,
regardless of the mode (Notification Cut-in).
l
Enabling and Disabling Incoming Call
Notifications
●
The watch performs a sound and/or
vibration operation when a notification is
received. You can enable or disable sound
and vibration alert as required.
l
Configuring Sound and Vibration
Settings
Important!
●
To receive phone notifications,
configure the settings below on your
phone.
iPhone: Enable CASIO WATCHES
phone app notifications.
Android: Enable the items below.
Notification access
Contacts access
Call history access
●
After the notification cut-in is displayed
for 1 minute, the display returns to the
screen that was shown before the cut-
in appeared. While a notification cut-in
is displayed, press (A) or (D) to check
the notification content.
Enabling and Disabling
Incoming Call Notifications
You can enable or disable notification receive
as required.
1. Display the current time screen.
l
Watch Mode
2. Hold down (A) for at least two seconds.
This enters the Control Mode.
3. Use (A) and (D) to select [SETTING].
4. Press (C).
This displays the setting menu screen.
Pointer
5. Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6. Press (C).
7. Use (A) and (D) to move the pointer to
[NOTIFICATIONS].
8. Press (C).
9. Use (A) and (D) to select a notification
receive ON/OFF setting.
[OFF]
Notifications are turned
off, and notification cut-
ins do not appear.
[ACTIVITY OFF]
Notification receive is
turned off during
activity measurement
only.
[NIGHT TIME OFF]
Notification receive is
turned off during the
specified night time.
[ACTIVITY & NIGHT
TIME OFF]
Notification receive is
turned off during
activity measurement
and the specified night
time.
[ON]
Enables receive and
notification cut-in
display.
●
Notification cut-ins display the details of
a received notification.
●
After about one minute, the watch
returns to the screen that was shown
before the notification cut-in appeared.
10. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the GENERAL SETTINGS
screen re-appears.
11. Hold down (E) for at least one second to
return to the current time screen.
Note
●
If you do not perform any operation for
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
Watch Operation Guide 3515
64

Casio 3515 Specifications

General

Brand	Casio
Model	3515
Category	Watch
Language	English