●
Swapping Your World Time and Home
Time
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
e
and
[CNCT] start to flash.
●
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing and remain on
the display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect Connected
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
World Time City
(New York)
World Time City
(Tokyo)
Before swapping After swapping
Home City
(Tokyo)
Home City
(New York)
Note
●
Auto time correction does not work for
24 hours after swapping the Home
Time and World Time.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button besides (B) to terminate
the connection.
2.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3.
X
Hold down (D) for at least three
seconds. Release the button when
e
and
[FIND] start to flash.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
Getting ready to
connect with phone
Sounding phone
alert sound
4.
X
Press any button besides (B) to stop the
tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
Alarm time, timer start time, and other settings
can also be configured using the CASIO
WATCHES phone app.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
e
and
[CNCT] start to flash.
●
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing and remain on
the display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect Connected
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Watch Operation Guide 3564
13
To Next Page
Loading...
