Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn your phone off and then back on, and
then tap the “CASIO WATCHES” icon.
Next, on the watch, hold down (C) for at
least three seconds.
Has the watch been re-paired with the
phone?
After deleting pairing information from the
CASIO WATCHES phone app, re-pair
them.
l
Deleting Pairing Information from the
CASIO WATCHES phone app
l
C
Pair the watch with a phone.
If you are unable to establish a
connection...
After deleting pairing information from the
watch, re-pair it with your phone.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Delete the pairing information from your watch
and then pair it with the phone you want to
connect with.
l
If you purchase another phone
Auto Time Correction by
Bluetooth Connection (Time
Correction)
Q1
When does the watch correct its
time?
The watch will connect with the phone and
perform auto time correction at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time correction is complete.
Q2
Auto time correction is not performed
at a scheduled time.
Is auto time correction not being
performed according to its normal
schedule?
Note that auto time correction is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is corrected manually on
the watch. Auto time correction will
resume 24 hours after either of the above
operations is performed.
Is auto time correction enabled?
Auto time correction will not be performed
at the scheduled times if it is not enabled.
Enable auto time correction.
l
Using the Watch in a Medical Facility or
Aircraft
Q3
The watch does not connect with a
phone and correct its time when I
press (D).
A time correction operation will not start if you
press (D) while the remaining countdown time
is 30 seconds or less. Stop the timer operation
and then press (D) again.
Q4
Time is not displayed correctly.
If your phone is unable to receive a signal
because you are outside its service range or
for some other reason, the watch may not be
able to display the correct time. If this
happens, connect the phone to its network
and then correct the time setting.
Watch Operation Guide 3564
29
To Next Page
Loading...
