Overview and Setup
EN-10
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page EN-1
for information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when you unplug the headphones. If you do, nothing
will sound from the speakers when you play.
1.
Press bp FUNCTION and then use the bo dial
to display “Other”.
2.
Press bp ENTER.
3.
Use the bo dial to display “Contrast”.
4.
Press bp ENTER.
This displays the NUM indicator.
5.
Use the bo dial to adjust display contrast.
• The contrast setting range is 01 to 17.
6.
Press bp ENTER to apply your setting.
This causes the NUM indicator to disappear.
7.
To exit the setting screen, press bq TONE.
Using Headphones
dl PHONES/OUTPUT jack
(Stereo mini jack (3.5mm))
Stereo mini plug
Adjusting Display Contrast
Con t r
as t
To Next Page
Loading...
Need help?
General
Weight and Dimensions
