EasyManuals Logo

Casio CTK-6200 User Manual

Casio CTK-6200
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Selecting and Playing a Tone
E-17
1.
While holding down the R-19 (SPLIT) button,
press the keyboard key that you want to be the
leftmost key in the right side (UPPER 1 part)
range.
The name of the key you press will appear on the
display as the new split point key name.
You also can use the R-14 (–, +) buttons to change the
displayed split point key name.
2.
When you are finished, release the R-19 (SPLIT)
button.
The initial default split point is at key F#3.
During Auto Accompaniment play (page E-24), the
keyboard to the left of the split point becomes the chord
keyboard.
1.
Perform steps 1 through 6 of the procedure
under “To layer two tones” (page E-16).
2.
Refer to the separate “Appendix” to look up the
group and the number of the tone you want to
assign to for the LOWER part.
3.
Press the R-19 (SPLIT) button.
This causes the @ indicator to appear on the
display. This indicates that the tone you select will
become the LOWER part tone.
4.
Use the TONE buttons and dial to select the
LOWER part tone.
5.
Play something on the left and right sides of the
keyboard to confirm that the tones are assigned
properly.
The right keyboard area plays the UPPER 1 and
UPPER 2 tones in a layered configuration, while the left
keyboard area plays the LOWER tone.
6.
To cancel keyboard split, press the R-19 (SPLIT)
button so the @ indicator disappears from
the display.
7.
To cancel tone layering, press the R-20 (LAYER)
button again so the A indicator disappears
from the display.
To specify the keyboard split point
LOWER part
Key you press
UPPER 1 part
Split point
To use layer and split together

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio CTK-6200 and is the answer not in the manual?

Casio CTK-6200 Specifications

General IconGeneral
Sound effectsChorus, Equalization, Reverberation
Tones quantity700
Tweeter diameter30 mm
Metronome tempo range30 - 255 bpm
Chorus effects quantity5
Compatible memory cardsSD, SDHC
Metronome beats per bar0, 2, 3, 4, 5, 6
Maximum memory card size32 GB
Maximum polyphony (notes)48
Mid-range driver diameter120 mm
Reverberation effects quantity10
USB connector typeUSB Type-B
Keys quantity61 keys
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth384 mm
Width948 mm
Height122 mm
Weight5700 g

Related product manuals