E-16
Attaching the screen protect sheet
1. Wipe off any dirt from the screen.
2. The screen protect sheet consists of three layers as shown in the fi gure.
Release
film
Screen
protect sheet
Release
film
3. Hold tape , remove the release fi lm ( ), and attach the screen protect sheet ( ) to
the terminal.
⇨
Screen
Tips!
So that the screen protect sheet is affi xed uniformly, ensure that its edges are under the
lip around the outside of the liquid-crystal screen.
Yes Yes No
4. Hold tape and remove the release fi lm( ).
To Next Page
Loading...
