E-50
1 AC Adaptor Jack Connect the AC adaptor (sold separately) here.
2 Power Switch Turns the power on and off .
3
Multiple Battery Charger
Connection Port
Use these connectors to connect Multiple Battery Chargers to each
other.
4
Connection Bracket
Attachment Holes
Used to connect Multiple Battery Chargers to each other.
5 Power Contacts Power is supplied to the DT-X400 via these contacts.
6 Power LED
This LED indicates the power status and the mounting status of the
DT-X400.
Off : Power off
Green: Power on, DT-X400 mounted correctly
Red: Power on, DT-X400 not mounted
Use these bundled items to join multiple chargers together.
• Bottom bracket
• Screws (for brackets)
Two each for one bracket
• Side bracket
Accessories
To Next Page
Loading...
