E-52
Connecting Multiple Battery Chargers
You can connect up to three Multiple Battery Chargers. Doing so makes it possible to supply
power to all the Multiple Battery Chargers using one dedicated AC adaptor.
1. As shown in the illustrations below, remove the connector covers of the Multiple Battery
Chargers you want to connect to each other.
2. Connect the two Multiple Battery Chargers as
shown below.
3. Fix the side and bottom brackets in place with
two screws on each bracket.
You can repeat the above steps to connect up to
3 Multiple Battery Chargers.
* Attach the connection brackets so that the
front side faces outwards. (The front side has
protruding ribs.)
Connector covers
Connectors
Brackets
Rib
Rib
Side
Bottom
To Next Page
Loading...
