㩷
3. Pause the installation when the menu in Figure 5.3 is displayed; you have to install the driver at
this point.
Figure 5.3
4. Connect the USB cable to the PC and the other end to the USB Cradle and also the AC adaptor to
the USB Cradle.
5. Put the DT-X8 on the cradle and confirm that the green LED on the front of the cradle is lit. If not,
be sure the DT-X8 is positioned firmly on the cradle.
6. When the DT-X8 is mounted on the USB Cradle, a dialog is displayed to prompt you to install
the suitable driver. If you have not yet obtained the driver files, see page 16 for detail of what you
need to download.
7. Choose No, not this t
ime radio button in Figure 5.4 and then click Next > button.
Figure 5.4
23
㩷
To Next Page
Loading...
Need help?
General
