Casio DT-X8 Series Quick Start Guide

㩷
5.1.2 If ActiveSync Is Already Installed
This is the procedure if ActiveSync is already installed on the PC. You just need to let the PC
recognize the DT-X8 and install the cradle driver as in steps 6 to 16 in Chapter 5.1.1.
1. Navigate to File ĺ Connection Settings…. from the menu in ActiveSync. See Figure 5.16.
Figure 5.16
2. Check Allow U
SB connection with this desktop computer. USB is available.
Figure 5.17
29
㩷

Casio DT-X8 Series Specifications

General

Brand	Casio
Model	DT-X8 Series
Category	Touch terminals
Language	English