Casio DT-X8 Series - Using the CMOS Imager (Imager Models); CMOS Imager Operation and Reading Guide

㩷
Notes:
x To resume the factory default setting, choose ActiveSync/LMWIN radio button in Step 3 on
the previous page (see Figure 5.20), and start up the DT-X8 again.
x The WMDC version 6.1 or later will support the connection establishment via USB interface.
Any other versions of the WMDC earlier are not interoperable with Windows CE devices
including the DT-X8 series.
32
㩷