Casio DT-X8 Series Quick Start Guide

㩷
5. If OK button in the popup warning message (see Table 5.7 for description of NetUI/NetUI radio
button) is clicked, the screen in Figure 5.27 appears. Click OK button to perform a reset on the
terminal so that the setting takes effect.
Figure 5.27
6. Check to make sure that the connection has been established using the NetSearch utility, and
then navigating to the Ping function in there. Enter HostName first and then click Ping to check
that you are connected to the network correctly.
37
㩷

Casio DT-X8 Series Specifications

General

Brand	Casio
Model	DT-X8 Series
Category	Touch terminals
Language	English