㩷
3. Registration of bar code and note
Enter bar code data in the Code field (see Figure 7.7) and a note about the bar code in the
Note field if necessary. Click OK button to complete the bar code registration.
Figure 7.7
4. Completion of registration
After completion of the bar codes registration, the screen in Figure 7.8 shows a list of bar codes
that have been registered in the I/O Simulator. Prior to debugging with the Device
Emulator, make sure that you register all bar codes you wish to use in debugging.
Figure 7.8
51
㩷
To Next Page
Loading...
Need help?
General
