29
Quick Start Basics
. To turn power on
Pressing [ON/OFF] (Power) enters the REC mode so
you can record images. Pressing [p] (PLAY) while
in the REC mode enters the PLAY mode, which you
can use to view snapshots and movies (pages 35,
117).
• You also can turn on the camera by pressing [p]
(PLAY).
• Pressing the shutter button while in the PLAY
mode returns to the REC mode.
• Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends.
Holding the lens with your hand so it cannot
extend creates the risk of malfunction.
• About 10 seconds after you press [p] (PLAY) to
enter the PLAY mode, the lens will retract into the
camera.
• The Sleep function (page 175) or Auto Power Off
(page 175) will turn off power automatically if you
do not perform any operation for a preset amount
of time.
. To turn off the camera
Press [ON/OFF] (Power).
NOTE
• The camera can be configured so power turns off when [p] (PLAY) is pressed
(page 176).
Turning the Camera On and Off
[p] (PLAY)
Back lamp
[ON/OFF] (Power)
Shutter button
To Next Page
Loading...
Need help?
General
