Casio ex-zr50 - Triggering a Self-Timer Operation with Motion

61
Snapshot Tutorial
With the Handsfree Mode, the camera automatically
triggers a self-timer countdown whenever it detects
movement in the vicinity of an icon on the monitor
screen. This means you can control operation of the
self-timer from a distance by waving your hand, so you
can include yourself in the image being shot.
1. Select one of the following as the recording
mode: Program Auto, Premium Auto Pro, or
Make-up or HS Best Selection (BEST SHOT
scene).
• Movie shooting is disabled while the HS Best Selection BEST SHOT scene is
being used.
2. Press [MENU].
3. Press [4], use [8] and [2] to select “r REC MENU” tab, and then
press [6].
4. Use [8] and [2] to select “Handsfree”, and then press [SET].
5. Use [8] and [2] to select “Motion Shutter”, and then press [SET].
6. Use [8] and [2] to select “Always” or “180°only”, and then press
[SET].
• If you select “180°only”, go to step 7. Selecting “Always” enters the Handsfree
Mode. Advance to step 8.
7. If you selected “180°only” in step 6 above, tilt the camera’s monitor
screen 180 degrees (page 17).
This enters the Handsfree Mode.
8. Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
The start self-timer icon will change to “ ” to indicate that the camera is in
standby for shooting.
9. Facing the camera, move your hand or perform some other movement
in the vicinity of the (start self-timer) icon on the monitor screen.
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
Triggering a Self-timer Operation with Motion (Handsfree)