56
Snapshot Tutorial
This feature uses super resolution technology and multiple Continuous Shutter (CS)
images to expand the zoom range for overall images of higher quality and clarity
(page 55).
1. In the BEST SHOT Mode, select “Multi SR Zoom” (page 79).
2. Press the shutter button to shoot.
NOTE
• Multi SR Zoom is effective when you want to capture delicate textures.
• The following functions are disabled when shooting with Multi SR Zoom.
Single SR Zoom, Triple Self-time, Sharpness, Contrast
• With Multi SR Zoom, the flash setting automatically becomes ? (Flash Off).
• Shooting with this function automatically sets Anti Shake to “Standard” (page 105),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
• Depending on shooting conditions and image composition, Multi SR Zoom may not
be able to produce the desired result.
• When shooting with this feature, “ISO 3200” cannot be selected for “ISO
Sensitivity” (page 46).
With High Speed CS, recording continues as long as you
keep the shutter button depressed.
The table below shows the settings that can be specified
for the CS speed and the number of images per High
Speed CS operation.
Expanding the Zoom Range to Shoot Clearer Snapshots
(Multi SR Zoom)
Shooting a Burst of Images (CS)
Shooting with High Speed CS
CS Speed
(High Speed CS
fps)
3 fps, 5 fps, 10 fps, 15 fps, 30 fps
fps = frames per second
Maximum CS
Shots
5, 10, 20, 30
Maximum CS shots
CS speed
To Next Page
Loading...
Need help?
General
