31
Quick Start Basics
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 99.
• For information about images recorded using continuous shutter (CS), see page
100.
1. Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed
snapshot also is included (page 12).
• You also can clear the information to
view only the snapshot (page 159).
• You can zoom in on the image by
sliding the zoom controller towards z (page 105). If you are recording a
snapshot that is very important to you, it is recommended that you zoom the
image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
Viewing Snapshots
[p] (PLAY)
[6]
[6]
[4]
[4]
B
To Next Page
Loading...
Need help?
General
Weight and Dimensions
